Suzuki GN125F, Service Manual

Page: 94 / 148

C H A S S I S
5-16
REASSEMBLY
INNER RACES
OUTER RACE
09940-34513: Steering race installer
09941-74910 : Steering bearing installer
STEEL BALL
Reassemble and remount the steering stem in the reverse
order of removal, and carry out the following steps:
Press in the upper and lower inner races with a special tool.
Apply grease to the upper and lower inner races when
installing the steel balls
.
Apply grease on the new lower oil seal
Press in the lower outer race with the special tool.
.
99000-25010 : Super grease ”A”
99000-25010 : Super grease ”A”
Tighten the steering stem nut to 40-50 N•m by using the
special tool.
Turn the steering stem right ang left, lock-to-lock, five or
six time to
seat the ball bearings.
“ ”
STEERING STEM NUT
09941-14911: Steering nut socket wrench
Steer stem bolt: 40~50 N•m