Suzuki GN125F, Service Manual

Page: 38 / 148

E N G I N E
3-7
Do not drop camshaft drive chain, pin and sprocket into
the crankcase.
.
The cam chain tensioner bolt is to be removed
only when disassembling the engine
A
A
Remove the camshaft sprocket bolts and detach the cam-
shaft.
Remove the cylinder head side nuts and cylinder side nuts.
Loosen the cylinder head cover nuts diagonally, then detach
the cylinder head.
Remove the rocker arm shaft set bolts
.
Pull out the rocker arm shafts with pliers, remove the spring
and spring washer.
If it is difficult to remove the cylinder head gently pry it
off while tapping the finless portion of the cylinder
head with a plastic hammer Be careful not to break the
fins.
,
.
DISASSEMBLY