Suzuki GN125F, Service Manual

Page: 103 / 148

C H A S S I S
5-25
REMOVAL AND DISASSEMBLY
Support the motorcycle by the center stand.
Remove the rear brake adjuster nut.
Puff off the cotter pin, remove the torque link nut and bolt.
Remove the rear axle nut.
Loosen the chain adjuster lock nut and adjuster bolt, right
and left.
Draw out the axle shaft and take off the chain from rear
sprocket.
Take off the rear wheel and separate the brake panel from
the wheel.
Flatten the washers and remove the four nuts.
Separate the rear sprocket and mounting drum from the
wheel.
Remove the oil seal by using the special tool.
09913-50121: Oil seal remover