Suzuki GN125F, Service Manual

Page: 62 / 148

E N G I N E
3-31
CRANKSHAFT, TRANSMISSION AND KICKSTARTERSET.
REMOVAL
Remove the cylinder head and cylinder. (Refer to page 3-7)
Remove the clutch and gear shifting shaft.(Refer to page 3-
21)
Remove the generator rotor and starting clutch. (Refer to
page 3-27)
Remove the neutral locate screw plug and oil filter cover.
Do not take off the neutral locating screw plug (inner
hexagon when drain the engine oil.
)
Remove the gear shifting cam guide.
Remove the gear shifting cam driven gear assembly.
Remove the gear switch position screws, take off the gear
position switch, pin and spring.
Remove the two bolts, take off the drive shaft oil seal block
plate.
Clamp the conrod small end with conrod holder, remove
the lock washer, remove the primary drive gear lock nut.
09910 20116 Conrod holder - :
Primary drive gear lock nut is left-hand nut.
Remove the crankcase mounting bolts.