Suzuki 2005 DL650K5, Service Manual

Page: 584 / 701

TROUBLESHOOTING PROCEDURE
Troubleshooting should be proceed as follows. If the order is performed incorrectly or any part is omitted, a
misdiagnosis may result.
1. Gather information from the customer. (
!
Page 82)
2. Perform the pre-diagnosis inspection. (
!
Page 83)
3. Inspect the ABS indicator light. (
!
Page 86)
4. Output the DTCs stored in the ABS control unit. (
!
Page 89)
5. Perform appropriate troubleshooting procedures according to the DTCs output. (
!
Page 90)
If troubleshooting procedures cannot be performed, try to determine the cause of the malfunction according
to the information gathered in 1 through 4 and inspect the wiring. (
!
Page 77 and 78)
%
6. Inspect the ABS components. (
!
Page 119)
7. Delete the DTCs and check the brake operation. (
!
Page 91)
* When disconnecting couplers and turning the ignition switch to ON, disconnect the ABS con-
trol unit coupler in order to prevent a DTC from being stored.
* Each time a resistance is measured, the ignition switch should be set to OFF.
13-80 DL650K7/AK7 (’07-MODEL)
PartShark.com
877-999-5686