Bringing the Benefits of Real-Time Data Collection to the World
Sutron Corporation, Tel: 703-406-2800,
http://www.sutron.com
86
Although it seems as though we would now hook this measure block up the to the log block
already placed in the setup, we actually now want to add another log block below the first. This
is because a setup blocks input cannot accept a signals from more than one block. However, this
results in no loss of functionality as the new log block can be configured to log to the same log
file as the previous one.
So, to add this second log block, click the
Add
button, select
Logging
to bring up the logging
blocks, select the
Log
block and then click
OK (w
e didn’t have to select the output from
processing as it was already selected from above). Now both of the signals from RMYoung will
be sampled and logged:
Changing Block Properties
Sensor Block Example
Now that all the setup blocks have been placed and the flow of data established, all that is left to
do is to change the properties of each block as desired. The properties window of a block can be
brought up by clicking the block and then clicking
Edit Properties
. Doing this for the RMYoung
sensor block brings up the following window:
Summary of Contents for Xpert2
