Sutron Xpert2, Operation And Maintenance Manual

Page: 41 / 336

Bringing the Benefits of Real-Time Data Collection to the World
Sutron Corporation, Tel: 703-406-2800, http://www.sutron.com
31
phrases over and over until the user pushes a button. If a button is
pushed, it will be queued, and should be processed by a BranchDTMF
command. Normally there is a 90 second inactivity timeout that is
reduced to 60 seconds when this command is used. The phone is
hungup if an inactivity timeout occurs.
Call Calls a subroutine in another part of the speech command specified
by a user Label. This works just like the Branch command, except
that control may be returned to the command after the Call when a
Return is encountered. Subroutines may call other subroutines.
DisableAlarms Disables further alarm transmissions using the Voice modem and
other SSP devices such as LOS Radio. They may be re-enabled using
the EnableAlarms command, by Basic program, or by accessing the
main menu and pressing CLEAR on the “Alarm: OFF” item.
EnableAlarms Re-enables alarm transmissions that have been disabled with
DisableAlarms.
Hangup Hangsup the phone and terminates the speech command
InputManual Inputs a number from the user. The number is entered with the DTMF
keypad. “*” may be used to specify a decimal point. Press the “#”
button is used to indicate the end. Pressing “*” twice will allow the
number to be re-entered. See SpeakManual, and StoreManual.
Example:
12*345#
would enter the number 12.345. Negative numbers are not supported.
Label Labels a section of the speech command, two types of labels exist. User
and DTMF. DTMF labels are branched to in response to the
BranchDTMF command, and user labels are branched to using the
Branch command.
Language Switches to the specified language folder. This effects all speech
phrases that may be spoken (ex: SpeakPhrase and SpeakData) after the
command. When adding phrases, be sure to select the appropriate
language using the combo box at the bottom of the screen. Using
subroutines (see Call and Return commands) it’s possible to create a
single phrase that can be spoken in multiple languages. The key is to
select the language with the Language command and then Call the
bi/multi-lingual phrase. For this to work, the (.vox) speech files must
be given the same name across the languages.
Pause Delays the speech command for the specified number of seconds
(resolution down to milliseconds)
Return Returns from a subroutine by branching back after the last Call
command. If the Call command wasn’t used, then control passes to the
beginning of the phrase.