Sutron Xpert2, Operation And Maintenance Manual

Page: 241 / 336

Bringing the Benefits of Real-Time Data Collection to the World
Sutron Corporation, Tel: 703-406-2800, http://www.sutron.com
231
XY Function (XYFunct)
Inputs
X
Y
Outputs
Z
Description
The XY Function block is for doing math between two inputs to produce an output value. The
two inputs may be from a single block or from two different blocks. To use a constant in an
equation (for example, to perform
x * 4 ), use the output from a Constant sensor block as one of
the inputs. The Units button should be used to tell the system what units to label the output
values with. If x and y inputs have the same units, these units will be retained through to the
output.
Block Placement
XYFunct output should be connected to the input of a measure (or other scheduled block). If you
were to connect it after a measure, multiple entries would go into the log, and the most current
data would not be used for both X and Y inputs. By placing the measure onto the output, the
system will get input data at the same time from both inputs.