Supero 1028GQ-TR, User Manual

Page: 66 / 146

5-18
S
UPER
S
ERVER 1028GQ-TR(T) User's Manual
Chassis Intrusion
A Chassis Intrusion header is located
at JL1. Attach an appropriate cable
from the chassis to alert an intrusion
when the chassis is opened.
Chassis Intrusion
Pin Definitions
Pin# Definition
1 Intrusion Input
2 Ground
Internal Speaker
Pin Definition
Pin# Definitions
Pin 1 Pos. (+) Beep In
Pin 2 Neg. (-) Alarm
Speaker
I-SGPIO2 Header
A Serial-Link General Purpose Input/
Output header (I-SGPIO2) supports a
serial-link interface for onboard SATA
connections.
I-SGPIO
Pin Definitions
Pin# Definition Pin Definition
1 NC 2 NC
3 Ground 4 Data
5 Load 6 Ground
7 Clock 8 N
NC = No Connection
Internal Speaker
The internal speaker (SP1) provides
audible indications for beep codes.
Universal Serial Bus (USB)
Two USB 3.0 ports (USB 0/1) are located on the rear I/O panel. In addition, a
header located next to the PCH chip provides two USB 2.0 connections (USB 2/3).
Cables are not included.
Standby Power Header
The onboard standby power header
is located at JSTBY1 on the mother-
board. See the table on the right for
pin definitions. (You must also have a
card with the standby power connec-
tor and a cable to use this feature.)
Standby PWR
Pin Definitions
Pin# Definition
1 +5V Standby
2 Ground
3 No Connection