manualshive.com logo in svg

Supero 1028GQ-TR, User Manual

Share
Download
Supero 1028GQ-TR User Manual Download Page 112

7-22

 SuperServer 1028GQ-TR(T) User’s Manual

EHCI Hand-Off

This item is for operating systems that do not support Enhanced Host Controller 
Interface (EHCI) hand-off. When this item is enabled, EHCI ownership change will 
be claimed by the EHCI driver. The settings are 

Disabled

 and Enabled.

Port 60/64 Emulation

Select Enabled for I/O port 60h/64h emulation support which will provide complete 
USB keyboard legacy support for the operating system that does not support Legacy 
USB devices. The options are Disabled and 

Enabled

.

USB 3.0 Support

Select Enabled for USB 3.0 support. The options are Smart Auto, 

Auto

,  Enabled,  

and Disabled.

SATA Configuration

When this submenu is selected, AMI BIOS automatically detects the presence of 
the SATA devices and displays the following items:

SATA Controller

This item enables or disables the onboard SATA controller supported by the Intel  
PCH chip. The options are Disabled and 

Enabled

.

Configure SATA as

Select IDE to configure a SATA drive specified by the user as an IDE drive. Select 
AHCI  to  configure  a  SATA  drive  specified  by  the  user  as  an AHCI  drive.  Select 
RAID to configure a SATA drive specified by the user as a RAID drive. The options 

are IDE, 

AHCI

, and RAID.

*If 

the item above "Configure SATA as" is set to AHCI, the following items will 

display

:

Support Aggressive Link Power Management

When this item is set to Enabled, the SATA AHCI controller manages the power 
usage of the SATA link. The controller will put the link to a low power state when 
the I/O is inactive for an extended period of time, and the power state will return 
to normal when the I/O becomes active. The options are Disabled and 

Enabled

.

Summary of Contents for 1028GQ-TR



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands