Supero 1028GQ-TR, User Manual

Page: 114 / 146

7-24
SuperServer 1028GQ-TR(T) User’s Manual
the I/O is inactive for an extended period of time, and the power state will return
to normal when the I/O becomes active. The options are Disabled and
Enabled .
SATA RAID Option ROM/UEFI Driver
Select EFI to load the EFI driver for system boot. Select Legacy to load a legacy
driver for system boot. The options are
Legacy , EFI, and Disabled.
SATA/sSATA RAID Boot Select
Select SATA Controller to boot the system from a SATA RAID device. Select
sSATA Controller to boot the system from a S-SATA RAID device. Select Both to
boot the system either from a SATA RAID device or from an sSATA RAID device.
Please note that the option-Both is not supported by the Windows Server 2012/
R2 OS. The options are None, SATA Controller,
sSATA Controller , and Both.
Serial ATA Port 0-Port 5
This item displays the information detected on the installed SATA drives on the
particular SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
Serial ATA Port 0-Port 5
Select Enabled to enable a SATA port specified by the user. The options are
Disabled and Enabled .
Serial ATA Port 0Port 5 Hot Plug
Select Enabled to enable hot-plugging support for a port specified by the user,
which will allow the user to replace a SATA disk drive installed on this port without
shutting down the system. The options are Disabled and
Enabled .
Serial ATA Port 0-Port 5 Spin Up Device
On an edge detect from 0 to 1, set this item to allow the PCH to start a
COMRESET initialization to the device. The options are
Disabled and Enabled.
Serial ATA Port 0-Port 5 SATA Device Type
Use this item to specify if the SATA port specified by the user should be
connected to a Solid State drive or a Hard Disk Drive. The options are Hard
Disk Drive
and Solid State Drive.