Supero 1028GQ-TR, User Manual

Page: 113 / 146

Chapter 7: AMI BIOS
7-23
SATA Port 0-Port 5
This item displays the information detected on the installed SATA drive on the
particular SATA port.
•
Model number of drive and capacity
•
Software Preserve Support
SATA Port 0-Port 5
Select Enabled to enable a SATA port specified by the user. The options are
Disabled and Enabled .
SATA Port 0-Port 5 Hot Plug
Select Enabled to enable hot-plugging support for a port specified by the user,
which will allow the user to replace a SATA disk drive installed on this port without
shutting down the system. The options are Disabled and
Enabled .
SATA Port 0-Port 5 Spin Up Device
On an edge detect from 0 to 1, select Enabled to allow the PCH to initialize the
device. The options are
Disabled and Enabled.
SATA Port 0-Port 5 SATA Device Type
Use this item to specify if the SATA port specified by the user should be
connected to a Solid State drive or a Hard Disk Drive. The options are
Hard
Disk Drive
and Solid State Drive.
*If the item above "Configure SATA as" is set to IDE, the following items will
display:
Serial ATA Port 0-Port 5
This item indicates that a SATA port specified by the user is installed (present)
or not.
SATA Port 0-Port 5 SATA Device Type (Available when a SATA port is
detected)
Use this item to specify if the SATA port specified by the user should be
connected to a Solid State drive or a Hard Disk Drive. The options are Hard
Disk Drive and Solid State Drive.
*If the item above "Configure SATA as" is set to RAID, the following items will
display:
Support Aggressive Link Power Management
When this item is set to Enabled, the SATA AHCI controller manages the power
usage of the SATA link. The controller will put the link to a low power state when