manualshive.com logo in svg

Supero 1028GQ-TR, User Manual

Share
Download
Supero 1028GQ-TR User Manual Download Page 127

Chapter 7: AMI BIOS

7-37

Trusted Computing (Available when a TPM device is installed)

Configuration

Security Device Support

If this feature and the TPM jumper on the motherboard are both set to Enabled, 
onboard security devices will be enabled for TPM (Trusted Platform Module) 
support to enhance data integrity and network security. Please reboot the system 
for a change on this setting to take effect. The options are 

Enabled

 and Disabled.

TPM State

Select Enabled to use TPM (Trusted Platform Module) settings to enhance system 
data security. Please reboot your system for any change on the TPM state to take 
effect. The options are 

Disabled

 and Enabled. 

Pending Operation

Use this item to schedule a TPM-related operation to be performed by a security 
device for system data integrity. Your system will reboot to carry out a pending TPM 
operation. The options are 

0

, Enable Take Ownership, Disable Take Ownership, 

and TPM Clear.

Note:

 Your system will reboot to carry out a pending TPM operation.

Current Status Information

This item displays the status of the TPM support on this motherboard.

TXT Support

Select Enabled to use Intel Trusted Execution Technology to enhance system 
security and data integrity. The options are 

Enabled 

and Disabled.

iSCSI Configuration 

This item displays iSCSI configuration information:

iSCSI Initiator Name

This item displays the name of the iSCSI Initiator, which is a unique name used 
in the world. The name must use the IQN format. The following actions can also 
be performed:

Summary of Contents for 1028GQ-TR



















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands