Supero 1028GQ-TR, User Manual

Page: 24 / 146

SuperServer 1028GQ-TR(T) User's Manual
3-2
3-3 Control Panel LEDs
There are five LEDs that provide status information about the system.
Power
The main power switch is used to apply or remove power from the power supply
to the server system. Turning off system power with this button removes the main
power but keeps standby power supplied to the system. Therefore, you must unplug
system before servicing.
Unit Identification
The uinit identification (UID) button turns on or off the blue light function of the
Information LED and a blue LED on the rear of the chassis. These are used to
locate the server in large racks and server banks.
3-2 Control Panel Buttons
The chassis includes two push-buttons that control power to the system.
Power
Indicates power is being supplied to the system power supply units. This LED should
normally be illuminated when the system is operating.
NIC2 and NIC1
Indicates network activity on LAN2 or LAN1 when flashing.
1
2