Supero 1028GQ-TR, User Manual

Page: 104 / 146

7-14
SuperServer 1028GQ-TR(T) User’s Manual
Gen3 (Generation 3) DN TX Preset
Use this item to set the Preset mode for PCI-E Gen3 downstream transactions
(from the master device to a slave device). The options are
Auto , P0 (-6.0/0.0
dB), P1 (-3.5/0.0 dB), P2 (-4.5/0.0 dB), P3 (-2.5/0.0 dB), P4 (0.0/0.0 dB), P5
(0.0/2.0 dB), P6 (0.0/2.5 dB), P7 (-6.0 /3.5 dB), P8 (-3.5/3.5 dB), and P9 (0.0/3.5
dB).
Gen3 (Generation 3) DN RX Preset Hint
Use this item to set the Preset Hint mode for PCI-E Gen3 downstream reception
(from a slave device to the master device). The options are
Auto , P0 (-6.0
dB), P1 (-7.0 dB), P2 (-8.0 dB), P3 (-9.0 dB), P4 (-10.0 dB), P5 (-11.0 dB), and
P6 (-12.0 dB).
Gen3 (Generation 3) Up TX Preset
Use this item to set the Preset mode for PCI-E Gen3 upstream transactions (from
a slave device to the master device).The options are
Auto , P0 (-6.0/0.0 dB),
P1 (-3.5/0.0 dB), P2 (-4.5/0.0 dB), P3 (-2.5/0.0 dB), P4 (0.0/0.0 dB), P5 (0.0/2.0
dB), P6 (0.0/2.5 dB), P7 (-6.0/3.5 dB), P8 (-3.5/3.5 dB), and P9 (0.0/3.5 dB).
Non-Transparent Bridge PCIe Port Definition (Port 3A only)
Select Transparent Bridge to configure the device installed on a PCI slot
specified by the user as a transparent bridge (TB) device. Select NTB
(Non-Transparent Bridge) to NTB to configure the device installed on a PCI
slot specified by the user as a non-transparent bridge (NTB) device used to
connect to another NTB device. The options are Transparent Bridge , NTB to
NTB, and NTB to RP.
Hide Port?
Select Yes to hide the PCI-E port specified from the OS . The options are No
and Yes.

IIO1 Configuration
IOU2 (IIO PCIe Port 1)
This feature allows the user to set the bus speed between the IOU2 and the
PCI-Exp port specified above. The options are x4x4, x8, and Auto .
IOU0 (IIO PCIE Port 2)
This feature allows the user to set the bus speed between the IOU0 and the
PCI-Exp port specified above. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8,
x16, and Auto .