Supero 1028GQ-TR, User Manual

Page: 119 / 146

Chapter 7: AMI BIOS
7-29
ASPM Support
Use this item to set the Active State Power Management (ASPM) level for a PCI-E
device. Select Auto for the system BIOS to automatically set the ASPM level based
on the system configuration. Select Disabled to disable ASPM support. The options
are
Disabled
and Auto.
Caution: Enabling ASPM support may cause some PCI-E devices to fail!
MMIOHBase
Use this item to select the base memory size according to memory-address mapping
for the PCH. The base memory size must be between 4032G to 4078G. The options
are
56T , 48T, 24T, 2T, 512G, and 256G.
MMIO High Size
Use this item to select the high memory size according to memory-address mapping
for the PCH. The options are
256G , 128G, 512G, and 1024G.
PC Devices Option ROM Settings
RSC-G-6/CPU2 Slot1 PCI-E x16 OPROM
RSC-G-6/CPU2 Slot2 PCI-E x16 OPROM
RSC-G-6/CPU1 Slot3 PCI-E x16 OPROM
RSC-GR-6/CPU1 Slot4 PCI-E x16 OPROM
RSC-GR-A88 upper/CPU1 Slot5 PCI-E x8 OPROM
RSC-GR-A88 lower/CPU2 Slot6 PCI-E x8 OPROM
Select Enabled to enable Option ROM support to boot the computer using a device
installed on the slot specified by the user. The options are Disabled, Legacy and
EFI.
Onboard Video Option ROM
Use this option to select the type of device installed in the onboard video device
used for system boot. The options are Disabled,
Legacy , and EFI.
VGA Priority
Use this item to select the graphics device to be used as the primary video display
for system boot. The options are
Onboard and Offboard.
Onboard LAN Option ROM Type
Select Legacy to boot the computer using a Legacy device installed on the
motherboard. The options are
Legacy and EFI.