Supero 1028GQ-TR, User Manual

Page: 109 / 146

Chapter 7: AMI BIOS
7-19
Link L0p Enable
Select Enable for Link L0p support. The options are Disable and Enable .
Link L1 Enable
Select Enable for Link L1 support. The options are Disable and
Enable
.
Early Snoop
Select Enable to support Early Snoop mode for the QPI link. The options are
Disable, Enable, and
Auto .
Isoc
Select Enable to enable Isochronous support to meet QoS (Quality of Service)
requirements. This feature is especially important for virtualization technology.
The options are
Disable and Enable.

Memory Configuration
Enforce POR
Select Enable to enforce POR restrictions on DDR4 frequency and voltage
programming. The options are
Enabled and Disabled.
Memory Frequency
Use this item to set the maximum memory frequency for onboard memory
modules. The options are
Auto , 1333, 1400, 1600, 1800, 1867, 2000, 2133,
2200, 2400, 2600, 2667, 2800, 2993, 3000, 3200, and Reserved.
Data Scrambling
Select Enabled to enable data scrambling to enhance system performance and
data integrity. The options are
Auto
, Disabled, and Enabled.
Enable ADR
Use this item to configure Automatic Diagnostic Repository (ADR) settings to
enhance memory performance. The options are Disabled and Enabled.
DRAM RAPL (Running Average Power Limit) Baseline
Use this item to set the run-time power-limit baseline for the DRAM modules.
The options are Disable, DRAM RAPL Mode 0, and
DRAM RAPL Mode 1 .