Supermicro SuperBlade SBM-GEM-X2C, User Manual

Page: 98 / 334

Superblade Network Modules User’s Manual
12
System Settings
Clicking on the S
YSTEM
S
ETTINGS
link brings up the S
YSTEM
S
ETTINGS
page ( Figure 7-9 ).
You can either choose to obtain the IP address through DHCP or decide to configure it
manually. If you choose the manual option, you can configure the D
EFAULT
IP A
DDRESS
and S
UBNET
M
ASK
for the management interface of the switch. If you choose the
D
YNAMIC
option, then the IP address is obtained based on the IP Address Allocation
Protocol. You must restart the switch for the configuration to take effect.
Table 7-3 lists the parameters found on this page.
Figure 7-9. System Settings Page
Table 7-3. System Settings Page Parameters
Parameter Description
IP Address Mode Specifies the IP Address Mode used.
IP Address Allow Protocol Specifies the IP address allocation protocol used.
Default IP Address Specifies the Default IP address.
Subnet Mask Specifies the Subnet Mask used.