Supermicro SuperBlade SBM-GEM-X2C, User Manual

Page: 128 / 334

Superblade Network Modules User’s Manual
42
Classmap
Clicking on the C
LASSMAP
tab brings up the Q
O
S C
LASSMAP
S
ETTINGS
page
( Figure 7-33 ). Classmap is used to classify the stream of traffic. Table 7-25 lists the
parameters found on this page.
Figure 7-33. QoS Classmap Settings Page
Table 7-25. QoS Classmap Settings Page Parameters
Parameter Description
Classmap ID
Specifies a unique ID for Classmap. It must be in the range from 1 to
65535 .
Filter ID Specifies the unique filter ID associated with this Classmap.
Filter Type
Specifies the filter type associated with the Classmap. It can be set as
either
MAC Filter (1) or IP Filter (2).