Supermicro SuperBlade SBM-GEM-X2C, User Manual

Page: 106 / 334

Superblade Network Modules User’s Manual
20
Target Address
Clicking on the T
ARGET
A
DDRESS
tab brings up the SNMP T
ARGET
A
DDRESS
S
ETTINGS
page ( Figure 7-15 ). Table 7-8 lists the parameters found on this page.
Figure 7-15. SNMP Target Address Settings Page
Table 7-8. SNMP Target Address Settings Page Parameters
Parameter Description
Target Name This field allows you to set the Target Name, which is a unique identifier.
Target IP Address
This field allows you to set the Target IP Address, which specifies a target
address to be used in the generation of SNMP operations.
Transport Tag
This field allows you to set the Transport Tag value, which is used to select
a target address for a particular operation.
Param
This field allows you to set Param, which contains SNMP parameters to be
used when generating messages to be sent to transport address. The type
of notification of the SNMP Trap Settings can be configured as
Trap or
Inform .
Storage Type
This drop-down list box allows you to set the Storage Type, which can be
configured as
Volatile or Non-Volatile .