Supermicro SuperBlade SBM-GEM-X2C, User Manual

Page: 107 / 334

21
Chapter 7: 10-Gb Ethernet Switch Firmware
Target Parameter
Clicking on the T
ARGET
P
ARAMETER
tab brings up the SNMP T
ARGET
P
ARAMETER
S
ETTINGS
page ( Figure 7-16 ). The Target Param specifies SNMP target information to
be used in the generation of SNMP messages. Table 7-9 lists the parameters found on
this page.
Figure 7-16. SNMP Target Parameter Settings Page
Table 7-9. SNMP Target Parameter Settings Page Parameters
Parameter Description
Parameter Name
This field allows you to set the Parameter Name setting, which is a unique
identifier.
MP Model
This drop-down list box allows you to set the MP Model used when
generating SNMP messages using this entry.
Security Model
This drop-down list box allows you to set the Security Model used when
generating SNMP messages using this entry.
Security Name
This field allows you to set the Security Name setting, which identifies the
current Param Name, on whose behalf SNMP messages will be
generated.