Supermicro SuperBlade SBM-GEM-X2C, User Manual

Page: 221 / 334

135
Chapter 7: 10-Gb Ethernet Switch Firmware
Neighbor
Clicking on the N
EIGHBOR CONFIGURATION
tab opens the OSPF N
EIGHBOR
C
ONFIGURATION
page ( Figure 7-106 ). Table 7-83 lists the parameters found on this page.
Router Dead Interval
Specifies the number of seconds that a router's Hello packets have not
been seen before it's neighbors declare the router down.
Transit Delay
Specifies the number of seconds taken to transmit a link state update
packet over the interface.
Retransit Interval
Specifies the number of seconds between link-state advertisement
retransmissions, for adjacentcies belonging to the interface.
Figure 7-106. OSPF Neighbor Configuration Page
Table 7-82. OSPF Virtual Interface Configuration Page Parameters (Continued)
Parameter Description