Supermicro SuperBlade SBM-GEM-X2C, User Manual

Page: 171 / 334

85
Chapter 7: 10-Gb Ethernet Switch Firmware
Mode Specifies the various Port Modes, such as LACP , Manual or Disable .
Activity Specifies whether the Port LACP Activity is Active or Passive .
Timeout
Sets the time within which LACP PDUs must be received on a port to avoid
timing out of the Aggregated Link. If
long timeout is chosen then the ports
will time out of the Port Channel in 90 seconds. If short timeout is chosen
then the ports will time out of the Port Channel in 3 seconds.
Wait Time (secs)
Configures the waiting time for a port after receiving Partner information
and before entering aggregation.
Bundle State
Indicates the current state of the port with respect to Link Aggregation. The
possible states are:
• Up in Bundle - The Port is an active member of the Port Channel.
• Up Individual - The Port is not a member of any Port Channel but its
Oper-Status is Up.
• Standby - The Port is a member of the Port Channel but is currently in
standby state.
• Down - The Ports Oper-Status is Down.
Aggregation Selection
Indicates whether the port chooses its aggregator dynamically or configure
statically.
Table 7-49. LA Port Settings Page Parameters (Continued)
Parameter Description