Supermicro SuperBlade SBM-GEM-X2C, User Manual

Page: 227 / 334

141
Chapter 7: 10-Gb Ethernet Switch Firmware
Interface
Clicking on the I
NTERFACE
tab opens the I
NTERFACE
S
ETTINGS
page ( Figure 7-111 ).
Table 7-88 lists the parameters found on this page.
Demand Extension Indicates the router's support for demand routing.
Reference Bandwidth
Specifies Reference bandwidth in kilobits/seconds, for calculating default
interface metrics.
SPF Delay Indicates the delay in routing calculation after a topology change.
SPF Hold Time Specifies the minimum time between two consecutive SPF calculations.
Default Passive Interface
Specifies whether all the OSPFv3 interfaces created after this setting are
passive or not.
Trace Level Defines the level of trace required for OSPFv3.
Figure 7-111. Interface Settings Page
Table 7-87. OSPFv3 Basic Settings (Continued)
Parameter Description