Supermicro SuperBlade SBM-GEM-X2C, User Manual

Page: 238 / 334

Superblade Network Modules User’s Manual
152
Route Aggregation
Clicking on the R
OUTE
A
GGREGATIONS
tab opens the BGP R
OUTE
A
GGREGATION
C
ONFIGURATION
page ( Figure 7-118 ). The routes advertised by BGP can be aggregated
and configured through this page. Table 7-95 lists the parameters found on this page.
Figure 7-118. BGP Route Aggregation Configuration Page
Table 7-95. BGP Route Aggregation Configuration Page Parameters
Parameter Description
ID Specifies the index to this table.
IP Address Prefix Specifies the IP address prefix, which needs to be aggregated.
IP Address Prefix Length
Decides, in combination with the IP Prefix, whether the aggregated route to
be distributed by this switch.
Route Advertise
Specifies to advertise only the aggregated routes by setting Summary
Only or to advertise all routes by setting All .
Status Specifies the status of the entry.