manualshive.com logo in svg

Supermicro SuperBlade SBM-GEM-X2C, User Manual

Share
Download
Supermicro SuperBlade SBM-GEM-X2C User Manual Download Page 258

Superblade Network Modules User’s Manual

172

Dynamic Multicast

The D

YNAMIC

 M

ULTICAST

 link permits to enable/disable Dynamic Multicast at the switch 

level and also at the per-port level. This essentially gives more control over the switch to 
the users. Once you choose to enable the protocol on the switch, you can decide on the 
ports on which the protocol needs to run.

It is also possible to enable/disable Restricted Group Registration on a per-port level. 
This will enable you to restrict the multicast groups learnt through GMRP learning.

This page uses the following control tabs to configure the dynamic multicast:

•

Dynamic Multicast

•

Port Settings

By default, the D

YNAMIC

 M

ULTICAST

 tab is loaded.

Dynamic Multicast

Figure 7-135. Dynamic Multicast Global Configuration Page

Summary of Contents for SuperBlade SBM-GEM-X2C















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands