Supermicro SuperBlade SBM-GEM-X2C, User Manual

Page: 203 / 334

117
Chapter 7: 10-Gb Ethernet Switch Firmware
DHCP Relay
The DHCP R
ELAY
link helps us to manage the DHCP Relay in the switch through the
following two control tabs:
• Basic Settings
• Interface Conf
By default, the B
ASIC
S
ETTINGS
tab is loaded.
Table 7-70. DHCP Pool Settings Page Parameters
Parameter Description
Pool ID Specifies the pool Id to index among the different subnet pools configured.
Subnet Pool Specifies the subnet of the IP address in the pool.
Network Mask Specifies the subnet mask of the IP address in the pool.
Start IP Address
Specifies the first IP address in the address pool that is used for dynamic
allocation by the DHCP server.
End IP Address
Specifies the last IP address in the address pool that is used for dynamic
allocation by the DHCP server.
Lease Time Specifies the time interval for which the IP address is valid.
Utilization Threshold Specifies the DHCP Pool utilization threshold value.
Status Specifies the status of the entry.