Supermicro SuperBlade SBM-GEM-X2C, User Manual

Page: 169 / 334

83
Chapter 7: 10-Gb Ethernet Switch Firmware
Mode
Specifies the various Port Modes, such as LACP (Link Aggregation Control
Protocol), Manual or Disable .
Ports
Specifies the interface indices that must be configured to be members of
the Port Channel.
Default Port
Specifies the default port when the port is configured to participate in
dynamic aggregator selection.
MAC Selection
Specifies the mode by which the MAC address for the Port Channel is
assigned. It can be dynamic or the user can force select a specific MAC
address.
Force MAC
Specifies the MAC Address that is assigned to the Port Channel. For this,
the MAC selection mode must be
Force .
No Of Ports Per Channel Indicates the number of ports that are bundled per port channel.
No Of HotstandBy Ports Indicates the number of ports that are in standby state per port channel.
Table 7-48. LA Port Channel Settings Page Parameters (Continued)
Parameter Description