Supermicro SuperBlade SBM-GEM-X2C, User Manual

Page: 216 / 334

Superblade Network Modules User’s Manual
130
Clicking on the B
ASIC
S
ETTINGS
tab opens the OSPF B
ASIC
S
ETTINGS
page
( Figure 7-102 ). Table 7-79 lists the parameters found on this page.
Table 7-79. OSPF Basic Settings Page Parameters
Parameter Description
OSPF Status Specifies the global status of the protocol in the switch.
Router ID Specifies the router identifier.
ASBR (Autonomous
System Border Router) Indicates the flag to denote whether the router is configured as an
Autonomous System Border Router.
RFC 1583 Compatibility
Permits to choose the route among multiple AS (Autonomous System) for
the same destination.
NSSA (Not So Stubby
Area) ASBR Default Route
Translator
Specifies either Enabled / Disabled for the P-bit setting used for the default
Type-7 LSA (Link State Advertisement) generated by ASBR.
ABR Type
Specifies the types of ABRs supported, where the types can be Standard ,
Cisco or IBM .