Supermicro SuperBlade SBM-GEM-X2C, User Manual

Page: 202 / 334

Superblade Network Modules User’s Manual
116
Pool Settings
Clicking on the P
OOL
S
ETTINGS
tab brings up the DHCP P
OOL
S
ETTINGS
page
( Figure 7-92 ). You can configure the IP address pool that can be used by the DHCP
server to allocate IP addresses. Table 7-70 lists the parameters found on this page.
Table 7-69. DHCP Basic Settings Page Parameters
Parameter Description
DHCP-Server
Specifies whether the DHCP server using this configuration is Enabled /
Disabled .
Blocked IP Address
Re-Use Timer (seconds)
Specifies the Reuse timeout value that is used by DHCP.
ICMP Echo
Specifies whether the ICMP (Internet Control Message Protocol) Echo
feature is
Enabled / Disabled .
Figure 7-92. DHCP Pool Settings Page