80
3. Print And Cut (Contour Cut)
3.00 Quick Reference for Chapter 3
•
How to calibrate the camera:
Section 3.03.2
•
How to set up a contour cut: Section 3.04
•
How to adjust the camera calibration:
Section 3.06.1
•
How to add more registration marks:
Section 3.08
•
Troubleshooting inaccurate PNC results:
Section 3.06
•
How to set up repeats:
Section 3.07
•
How to do a PNC from a USB flash drive file:
Section 3.09.1
•
How to use the
Array Mark
function on the control panel:
Section 3.09.2
3.01 What Is a Print and Cut (PNC)?
•
The print and cut process (also called PNC and contour cutting) involves printing an image from SignMaster
to any printer you own and then, with the aid of the Skycut’s camera, have the image or images cut out with
perfect precision. Below are three typical kinds of print and cut applications but there can be other kinds.
Cuts along the actual borders of the printed image(s):
Cuts outside of the borders but follows the shape(s) of the printed image(s):
Cuts follow a different shape from that of the printed image(s):
Image is precisely cut along
printed borders
Image is cut in same shape
but offset from the printed
borders (contour cut)
