111
•
Click on the
Cutter Control
tab and enter the settings for engraving:
•
On the Skycut, the metal tag needs to be very firmly attached to the cutting mat. Place strips of double-sided
tape onto the mat, where the tag will be mounted:
•
When placing the tag onto the mat, align the rightmost side of the tag with a vertical grid line and the
bottommost side of the tag with a horizontal grid line. The intersection of the two gridlines will be the origin
for the engraving process:
Double sided tape is placed on the
mat to cover the size of the tag (note:
the pink liner hasn’t yet been removed
from the top of the tape)
Check
Absolute (position)
Design is in same location
as on the
Page
Verify
Assign Tools by
Color
is not checked
Uncheck
Blade Offset
Change to settings
for engraving
