73
Convert the measurements to decimals and enter these values into the same
Width
and
Length
fields.
After entering each number, the scaling percentage is automatically calculated:
Click on
Update
and a prompt window will ask if you want to
Apply Scale Adjustment
. Click on
Yes
and you’ll be back in the
Vinyl Spooler
window. To verify the scaling, again click on
Cutter Scale
and
repeat the same steps. Make sure you leave your new scale factors in place by having the following
option marked:
Once your test rectangle is drawing at the correct size, the calibration process is complete.
Enter actual
Width
and
Length
Calculated
Scale
values
Click on
Update
Leave this checked
