70
On the Skycut, load a sheet of paper and insert the test pen. Move the test pen to the lower right corner
of the paper. Make sure you have proper settings for drawing and click on
Cut Test
to have the shape
drawn.
Using a mm ruler, carefully measure the
Width
(left-to-right) and the
Length
(top-to-bottom) that drew:
Write these measurements onto your sheet:
These values can now be entered into the same
Width
and
Length
fields, again adding “mm” after
each number as shown:
Width, X
Length, Y
Feed the mat this direction
into the Skycut
Enter actual
Width
and
add “mm”
Enter actual
Length
and add “mm”
