101
•
The purpose of having intermediate scans is to correct for any slippage that occurs due to friction or
excessively fast cutting speed.
•
Use
4 Mark
in situations where the repeats are quite large, thus there’s a larger distance between
the repeats and slippage is
more likely to occur. It’s also a good option when cutting thicker
materials because the higher force applied by the blade can cause more drag on the material or
cutting mat.
•
Use
1 Mark
in situations where the material is thin, the cuts are simple, and the distance between
the repeats is relatively small. Obviously, this is the most time-efficient choice of the three options
since a 4 mark scan is only performed one time.
•
Use
Alternate
as a compromise between the other two options. Experience will determine how high
of an
Interval
can still yield the accuracy you need.
