1
Skycut Series C with SignMaster
November 19, 2018
You can expect updates to this manual over the next few months
Do NOT read this entire manual
… unless you want to.
•
At the start of
Chapters 1 - 4
are short sections with references to find what you need plus some important
reminders. PLEASE read these short sections at the very least and refer back to them, when needed.
•
Chapters 1 and 2 are very important in terms of correctly setting up your Skycut to work with SignMaster
and learning the ins and outs of cutting.
•
Chapter 3 is for those owners wanting to perform print and cut applications.
•
Chapter 4 covers using the Skycut accessory tools.
•
Chapter 5 covers several SignMaster functions of interest: creating contour cuts and engraving fills
It’s not practical to print this entire manual because:
•
It’s a waste of paper and ink if you only ever need certain sections.
•
The live links to videos and web sites in the manual will not work.
•
This manual will be updated from time to time.
•
You cannot search on individual words.
Also:
•
Note the green
icons which link to videos related to the section in which they are located. These
videos will enhance your learning experience.
________________________________________________________________
© 2018 Sunrise Electronic Technology Co., Ltd. All Rights Reserved
