SunFounder PiDog Manual Download Page 78

Page: 78 / 109

SunFounder PiDog Kit, Release 1.0

• E: Sit.

• F: Stand.

• G: Lie.

• I: Scratch PiDog’s head.

• N: Bark.

• O: Wag tail.

• P: Pant.

• K: Control PiDog’s movement (forward, backward, left and right).

• Q: Controls the orientation of PiDog’s head.

• J: Switch to voice control mode. It supports the following voice commands:

–

forward

–

backward

–

turn left

–

turn right

–

trot

–

stop

–

lie down

–

stand up

–

sit

–

bark

–

bark harder

–

pant

–

wag tail

–

shake head

–

stretch

–

doze off

–

push-up

–

howling

–

twist body

–

scratch

–

handshake

–

high five

Then you may want to master its basic functions, or write some fun examples.

If you are familiar with Python programming, you can find examples of PiDog’s basic functions in the

/home/pi/

pidog/basic_examples

directory.

If you prefer, you can master them in a step-by-step fashion using the lessons provided below.

Chapter 2. Play with Python

Summary of Contents for PiDog














































































































Search results

Summary of Contents for PiDog

Reviews:

Related manuals for PiDog

Brands by name

Popular brands

SunFounder PiDog, Manual

Search results

Summary of Contents for PiDog

Reviews:

Related manuals for PiDog

Brands by name

Popular brands