Sun Oracle Fire X4470 M2, Service Manual

Page: 4 / 194

iv Sun Server X2-4 Service Manual • April 2013
2.3.2 Using an Antistatic Mat 2–4
2.4 Positioning the Server for Maintenance 2–4
▼
Extend the Server to the Maintenance Position 2–4
2.5 Releasing the Cable Management Arm 2–5
▼ Release the CMA 2–5
2.6 Powering Off the Server 2–6
▼ Power Off the Server Using the Service Processor Command-Line
Interface
2–7
2.7 Removing the Server Top Cover 2–8
▼ Remove the Server Top Cover 2–8
2.8 Removing or Installing Filler Panels 2–9
2.9 Attaching Devices to the Server 2–10
2.9.1 Connector Locations 2–10
2.9.2 Cabling the Server 2–11
▼ Cable the Server 2–11
3. Servicing CRU Components That Do Not Require Server Power Off 3–1
3.1 Servicing Disk Drives (CRU) 3–1
3.1.1 Disk Drive Status LED Reference 3–1
3.1.2 Removing and Installing Disk Drives and Disk Drive Filler Panels
3–2
▼
Remove a Disk Drive Filler Panel 3–2
▼
Remove a Disk Drive 3–3
▼
Install a Disk Drive 3–4
▼ Install a Disk Drive Filler Panel 3–5
3.2 Servicing Fan Modules (CRU) 3–5
3.2.1 About Server Fans 3–6
3.2.2 Fan Module LED Reference 3–6
3.2.3 Detecting Fan Module Failure 3–7
3.2.4 Removing and Installing Fan Modules 3–7