Sun Oracle Fire X4470 M2, Service Manual

Page: 36 / 194

2-10 Sun Server X2-4 Service Manual • April 2013
module slot, the server might overheat due to improper airflow. For instructions on
removing or installing a filler panel for a server component, refer to the section in
this guide about servicing that component.
2.9 Attaching Devices to the Server
As part of servicing the Sun Server X2-4, you might have to connect devices to the
server. The following sections describe the locations of connectors on the server and
the order in which you should attach cables and devices to the server.
2.9.1 Connector Locations
FIGURE 2-5
shows and describes the locations of the Sun Server X2-4 back panel
connectors.
FIGURE 2-5
Server Back Panel Connectors
Figure Legend
1 Power supply unit 0 AC inlet 5 Service processor (SP) network management
(NET MGT) Ethernet port
2 Power supply unit 1 AC inlet 6 Serial management (SER MGT)/RJ-45 serial
port
3 Gigabit Ethernet ports NET-0, 1, 2, 3 7 DB-15 video connector
4 USB 2.0 ports