Sun Oracle Fire X4470 M2, Service Manual

Page: 142 / 194

8-8 Sun Server X2-4 Service Manual • April 2013
5. Press Enter to return to Preboot Menu selections.
The Preboot Menu selections appear.
6. Press Enter to move through the settings until the
check_physical_presence
setting appears.
To change the
check_physical_presence
setting, type
no
, then press Enter.
The Preboot Menu displays the
check_physical_presence
setting with the
new value.
7. Press Enter for the new value to take effect.
The Preboot Menu asks you to confirm your changes.
Enter ‘y[es]’ to commit changes: [no]
8. Type
y
to save your changes and exit the edit session.
If you want to exit the edit session without saving your changes, type
n
.
9. To exit the Preboot Menu, type
boot
.
The following example shows an edit session where the
check_physical_presence
setting is changed.
Note –
For a list of other settings you can edit in the Preboot Menu, see
Section 8.3.1.2 “Edit Mode Settings in Preboot Menu” on page 8-9 .
Preboot> edit
Press Enter by itself to reach the next question.
Press control-C to discard changes and quit.
Values for baudrate are {[ 9600 ]| 19200 | 38400 | 57600 | 115200}.
Set baudrate? [9600]
Values for serial_is_host are {[ 0 ]| 1 }.
Set serial_is_host? [0]
Values for bootdelay are { -1 | 3 | 10 | 30 }.
Set bootdelay? [3] 10
Set bootdelay? [10]
Values for bootretry are { -1 | 30 | 300 | 3000 }.
Set bootretry? [-1]
Values for diags_mode are { Normal | Quick | Extended | Skip }.
Set diags_mode? [Normal]
Values for preferred are {[ 0 ]| 1 }.
Set preferred? [<not set>]
Values for preserve_conf are {[ yes ]| no }.
Set preserve_conf? [yes]
Values for check_physical_presence are {[ yes ]| no }.
Set check_physical_presence? [yes] no