Sun Microsystems Server X4-2 Installation Manual Download Page 100

Page: 100 / 208

Sun Server X4-2 Installation Guide • February 2014

3. Type your user name and password.

Note –

To enable first-time login and access to Oracle ILOM, a default Administrator

account and its password are provided with the system. To build a secure
environment, you must change the default password (

changeme

) for the default

Administrator account (

root

) after your initial login to Oracle ILOM. If this default

Administrator account has since been changed, contact your system administrator for
an Oracle ILOM user account with Administrator privileges.

4. Click Log In.

The System Information > Summary page appears.

Summary of Contents for Server X4-2

















































































































































































































Search results

Summary of Contents for Server X4-2

Reviews:

Related manuals for Server X4-2

Brands by name

Popular brands

Sun Microsystems Server X4-2, Installation Manual

Search results

Summary of Contents for Server X4-2

Reviews:

Related manuals for Server X4-2

Brands by name

Popular brands