Sun Microsystems Server X4-2, Installation Manual

Page: 148 / 208

134 Sun Server X4-2 Installation Guide • February 2014
Configuring RAID in UEFI BIOS Boot Mode With
the Sun Storage 6 Gb SAS PCIe RAID Internal
HBA
The BIOS RAID configuration utilities support configuring RAID with the server set
to UEFI BIOS Boot Mode.
Note – Some operating systems and virtual machine software only support the
Legacy BIOS Boot Mode. For a list of operating systems and virtual machine software
that support UEFI BIOS Boot Mode, see
“UEFI BIOS Boot Mode” on page 29 .
■
“Configure RAID in UEFI BIOS Boot Mode With the Sun Storage 6 Gb SAS PCIe
RAID Internal HBA” on page 134
▼
Configure RAID in UEFI BIOS Boot Mode With the Sun
Storage 6 Gb SAS PCIe RAID Internal HBA
1. Power on or reset the server.
For example, to reset the server:
■
From the local server , press the Power button (approximately 1 second) on the
front panel of the server to power off the server, then press the Power button
again to power on the server.
■
From the Oracle ILOM web interface , select Host Management > Power
Control, then select Reset from the Select Action list box.
■
From the Oracle ILOM CLI , type:
reset /System
The power-on self-test (POST) sequence begins.
2. To enter the BIOS Setup Utility, press the F2 key (Ctrl+E from a serial
connection) when prompted and while the BIOS is running the power-on
self-tests (POST).
After a few moments, the BIOS Setup Utility appears.
3. Use the right arrow key to navigate to UEFI Driver Control menu.
The UEFI Driver Control menu appears.