Sun Microsystems Server X4-2 Installation Manual Download Page 33

Page: 33 / 208

About Server Features and
Components

This section describes the components, LEDs, connectors, and disk management
options for the server.

Related Information

■

“Cabling the Server” on page 75

Description

Links

Review server features and components.

“Server Components” on page 20

Locate status indicators, connectors, and
storage drives on the server front and back
panels.

“Front Panel Status Indicators, Connectors,
and Drives” on page 22
“Back Panel Status Indicators, Connectors,
and PCIe Slots” on page 25

Review server management software.

“Server Management Software Overview” on
page 26

Summary of Contents for Server X4-2

















































































































































































































Search results

Summary of Contents for Server X4-2

Reviews:

Related manuals for Server X4-2

Brands by name

Popular brands

Sun Microsystems Server X4-2, Installation Manual

Search results

Summary of Contents for Server X4-2

Reviews:

Related manuals for Server X4-2

Brands by name

Popular brands