Sun Microsystems Server X4-2, Installation Manual

Page: 59 / 208

Installing the Server Into a Rack 45
FIGURE:
Aligning the Mounting Bracket With the Server Chassis
2. With the heads of the five chassis locating pins protruding through the five
keyhole openings in the mounting bracket, pull the mounting bracket toward
the front of the chassis until the mounting bracket clip locks into place with an
audible click.
3. Verify that the rear locating pin has engaged the mounting bracket clip.
4. Repeat Step 1 through Step 3 to install the remaining mounting bracket on the
other side of the server.
Related Information
■
“Mark the Rackmount Location” on page 46
■
“Attach Tool-less Slide-Rail Assemblies” on page 47
Figure Legend
1 Chassis front
2 Slide-rail lock
3 Mounting bracket
4 Mounting bracket clip