Sun Microsystems Server X4-2, Installation Manual

Page: 32 / 208

18 Sun Server X4-2 Installation Guide • February 2014
Optional Component Installation
Standard system components are installed at the factory. Optional components that
you purchased independent of the standard configuration are shipped separately,
and in most cases should be installed before you install the server in a rack.
The following optional components can be ordered and purchased separately:
■
PCIe cards
■
DDR3 DIMM memory kits
■
Storage drives
■
Software media
If you ordered any options that are not factory installed, refer to Sun Server X4-2
Service Manual, “About System Components” on page 16 .
Supported components and their part numbers are subject to change over time and
without notice. For the most up-to-date list, go to:
https://support.oracle.com/handbook_private/
Note – This site requires an Oracle web account for access.
Click the name and model of your server. On the product page that opens for the
server, click Full Components List for a list of components.
If you ordered any options that are field-replaceable units (FRUs) or
customer-replaceable units (CRUs), refer to the service label on the top cover of the
server or the component removal and replacement procedures in the
Sun Server X4-2
Service Manual, “About System Components” on page 16 for installation instructions.
Related Information
■
“Server Components” on page 20
■
Sun Server X4-2 Service Manual, “About System Components” on page 16