Sun Microsystems Server X4-2, Installation Manual

Page: 169 / 208

Configuring the Preinstalled Oracle Solaris 11.1 Operating System 155
▼
Configure the Preinstalled Oracle
Solaris 11.1 Operating System
After you have completed the configuration worksheet, use the following procedure
to configure the preinstalled Oracle Solaris 11.1 operating system.
1. If you are not already logged in to Oracle ILOM, log in either locally from a
serial connection, or remotely from an Ethernet connection.
See “Connecting to Oracle ILOM” on page 81 .
2. Power on or restart the server, as follows:
■
To power on the server, use one of the following methods:
■
From the Oracle ILOM web interface System Information page, click Host
Management > Power Control, and in the Select Action list box, click Power
On.
■
From the Oracle ILOM CLI, type the following command from the prompt:
-> start /System
When prompted, type
y
to confirm:
Are you sure you want to start /System (y/n)? y
Starting /System
■
To restart the server, use one of the following methods:
■
From the Oracle ILOM web interface System Information page,
click Host
Management > Power Control, and in the Select Action list box, click Reset.
■
From the Oracle ILOM CLI, type the following command from the prompt:
-> reset /System
When prompted, type
y
to confirm:
Are you sure you want to reset /System (y/n)? y
Serial console started.
The server begins the boot process.
3. Start the host console using one of the following methods:
■
From the Oracle ILOM web interface, click Remote Control > Launch Remote
Console.
■
From the Oracle ILOM CLI, type:
-> start /HOST/console