Sun Microsystems Fire F3800 Quick Reference Manual Download Page 46

Page: 46 / 126

RTU/RTS Connectors & indicators

Sun Confidential: Internal Only

Sun Fire 3800 - 6800 Quick Reference Guide

RTU/RTS Connectors & indicators

Note: J11 is only active if RTS0 is connected
J12 is only active if RTS1 is connected

The LEDs have a different meaning on the RTS than on the rest of the
FRUs as shown.

LED
Position

LED Color

State

Meaning

Left

Green

On
Off

Flashing

The source is present and is OK.
The source is not present or is less
than the specification.
The source is out of the specification.

Middle

Green

Off

Flashing

The relay is energized and connected
to the outlets.
The relay is de-energized and
docked.
The relay is de-energized and
undocked.

Right

Amber

On
Off

The module has a fault.
The module does not have a fault.

Summary of Contents for Fire F3800





























































































































Search results

Summary of Contents for Fire F3800

Reviews:

Related manuals for Fire F3800

Brands by name

Popular brands

Sun Microsystems Fire F3800, Quick Reference Manual

Search results

Summary of Contents for Fire F3800

Reviews:

Related manuals for Fire F3800

Brands by name

Popular brands