Setdefaults
Sun Confidential: Internal Only
111
SunService Sun Microsystems, Inc. All Rights Reserved. Enterprise Services
Setdefaults
The
setdefaults
command will set the default configuration values.
This command does the following:
●
This command sets the defaults for all domains and the platform
when it is invoked from the platform shell, and sets the defaults for
the domain only when invoked from that domains shell.
●
Removes passwords on the domains
If you are installing the platform, set everything back to its defaults,
and start afresh. setdefaults does not reset any OBP variables to
their defaults. Set the obp variables back to their defaults at the
domain ok prompt...
sc0-4800a:A> setdefaults
Do you want to restore the default values now? [no] yes
Feb 23 07:24:55 sc0-4800a Domain-A.SC: Setting defaults for domain A.
sc0-4800a:A>
6800b-sc0:A> setkeyswitch on
Powering boards on ...
Testing CPU Boards ...
{/N0/SB0/P2} Running CPU POR and Set Clocks
{/N0/SB0/P3} Running CPU POR and Set Clocks
{/N0/SB0/P2} @(#) lpost 5.16.0 2003/12/24 09:54
{/N0/SB0/P3} @(#) lpost 5.16.0 2003/12/24 09:54
.
.
{/N0/SB0/P2} DCB_ENTER_OBP command succeeded
{/N0/SB0/P3} DCB_ENTER_OBP command succeeded
Entering OBP ...
Sun Fire 4800
OpenFirmware version 5.16.0 (12/24/03 09:54)
Copyright 2001-2004 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
SmartFirmware, Copyright (C) 1996-2001. All rights reserved.
16384 MB memory installed, Serial #50804601.
Ethernet address 0:3:ba:7:37:79, Host ID: 83073779.
{2} ok set-defaults
{2} ok
