L3214 Laser Cutter
User’s Manual
Maintenance
53
4.4
Maintenance Overview
ATTENTION
: Make sure the power supply to the laser cutter is switched off
before starting maintenance tasks!
ATTENTION
: In the tables below, we consider 8 operational hours per day
(“1 Day")
. For example, if there are two 8-hour shifts in a 24-hour period, this
means that the component must be checked not once, but twice in those 24
hours (after each shift).
ATTENTION:
The intervals below are to be considered as the maximum allowed
time between maintenance tasks. If you notice that a component requires
maintenance sooner than indicated below, do not postpone it.
LASER CUTTER
Component
Task
By
Max.
Interval
Reference
Travelling Mirror
Clean
End User
1 Day
Page 35
Head Mirror
Clean
End User
1 Day
Page 41
Head Lens
Clean
End User
1 Day
Page 38
Nozzle
Clean
End User
1 Day
Page 43
Airflow Nozzle
Check
End User
1 Day
Page 45
Water collection bowl
(compressed air
regulator)
Check/Empty
End User
1 Day
Page 45
Nozzle Height
Check
End User
1 Day
Page 44
Conveyor Planks
Check/Clean
End User
1 Week
Page 47
Static Mirror
Clean
End User
1 Month
Page 35
Combiner
Clean
End User
1 Month
Page 37
Emergency Stops
Check
End User
1 Month
Laser Beam Alignment
Check
End User
1 Month
Cutting Head Drive
Belt
Clean and
Lubricate
Dealer
1 Year
Vision Camera Lens
and Scanning Camera
UV Filter
Calibration
check/Clean
Dealer
1 Year
Overall Machine
Service (all the above)
Check
Dealer
1 Year
All Optical
Components
Replace
Dealer
2 Years
Reprocess Laser Unit
Reprocess
Dealer
15
–
20K
hours
