L3214 Laser Cutter
User’s Manual
Safety
7
1
SAFETY
1.1
Safety
1.1.1
General
The manufacturer has no direct control over the machine operation and application. Proper
safety practice is the sole responsibility of the owner, user, and operator.
All instructions and safety warnings in this manual are based upon the use of this machine
under proper operating conditions without alterations from the original design.
Any use of the laser cutter that is beyond the capabilities of the combination laser
source/material is considered as improper use and may result in injury and/or serious damage
to the machine and will lead to loss of warranty.
The installation of the machine, accessories, and spare parts must not be done by untrained
or unauthorized persons. Also, the described maintenance procedures need to be followed and
performed by trained personnel.
1.1.2
Symbols used in this manual
Warning with dark (red) symbol: Refers to immediate threat that can cause
serious injuries and effects on health and safety.
Warning with light (yellow) symbol: Refers to a dangerous situation that can
cause injuries and serious damage to the machine.
Attention with dark (red) symbol: Refers to useful information to prevent
damage to the equipment and prolong the service life of the machine.
Attention with light (yellow) symbol: Refers to useful tips to enhance user-
friendliness and make the work significantly easier.
Note: Can be considered as a general tip, something that is useful to know.
